Einstein sculpture

Einstein sculpture 285 x 224 x 280 mm,

Printed on a 3Dprinterlab.org standard Prusa i3 (200 X 200 Y 200 Z).
Split the model into 5 parts and printed them with 2% infill. After printing filled the parts with plaster and glued them together with epoxy and superglue. Primed the model with zinc primer, sanded, primed a second time. Sanded again and filled gaps with epoxy.
And again sanding.
Painted the model with hammer effect gold colored paint.

WP_20160326_18_42_25_Pro_50 WP_20160326_18_43_13_Pro_50 WP_20160323_13_40_06_Pro_50

Files are available on Thingiverse

[efb_likebox fanpage_url=”3dprinterlab” fb_appid=”OPTIONAL_SEE_FAQ” box_width=”600″ box_height=”150″ responsive=”1″ show_faces=”0″ show_stream=”0″ hide_cover=”0″ small_header=”0″ hide_cta=”0″ locale=””]

Nefertiti full size

 

Nefertiti model inspired by the blog post and Youtube video from RichRep (Richard Horne)http://richrap.blogspot.nl/2016/03/3d-printing-and-finishing-nefertiti.html

The model is printed in PLA, weighs 9.7 kilo and 50 centimeter high.

I had to cut the model into 11 pieces so it fitted my 3dprinterlab.org standard Prusa i3 (200 X 200 Y 220 Z build space), printed with a 0.4 mm nozzle.

After printing the parts I filled them with plaster and glued them together with epoxy. Then I sanded down the joint and gave it a coat of Zinc primer and sanded down the model very lightly to preserve the 3d printer artifacts. Finally I gave the model 3 coats of golden spray paint.

WP_20160319_13_14_56_Pro-50WP_20160319_13_13_32_Pro-50WP_20160319_13_16_31_Pro-50

 

File are available at Thingiverse

[efb_likebox fanpage_url=”3dprinterlab” fb_appid=”OPTIONAL_SEE_FAQ” box_width=”600″ box_height=”150″ responsive=”1″ show_faces=”0″ show_stream=”0″ hide_cover=”0″ small_header=”0″ hide_cta=”0″ locale=””]

Nefertiti small try-out

Started to print Nefertiti on actual size. First I printed a small version to check the model.

Inspired by RichRep (Richard Horne)

WP_20160312_19_39_54_Pro WP_20160312_19_40_08_Pro

[efb_likebox fanpage_url=”3dprinterlab” fb_appid=”OPTIONAL_SEE_FAQ” box_width=”600″ box_height=”150″ responsive=”1″ show_faces=”0″ show_stream=”0″ hide_cover=”0″ small_header=”0″ hide_cta=”0″ locale=””]