Nefertiti full size


Nefertiti model inspired by the blog post and Youtube video from RichRep (Richard Horne)

The model is printed in PLA, weighs 9.7 kilo and 50 centimeter high.

I had to cut the model into 11 pieces so it fitted my standard Prusa i3 (200 X 200 Y 220 Z build space), printed with a 0.4 mm nozzle.

After printing the parts I filled them with plaster and glued them together with epoxy. Then I sanded down the joint and gave it a coat of Zinc primer and sanded down the model very lightly to preserve the 3d printer artifacts. Finally I gave the model 3 coats of golden spray paint.



File are available at Thingiverse

[efb_likebox fanpage_url=”3dprinterlab” fb_appid=”OPTIONAL_SEE_FAQ” box_width=”600″ box_height=”150″ responsive=”1″ show_faces=”0″ show_stream=”0″ hide_cover=”0″ small_header=”0″ hide_cta=”0″ locale=””]